Atlas Copco Authorized Sales and Service Distributor
Service & Maintenance 6 October 2026

Which Oil and What Grade Should Be Used in Compressors?

Which Oil and What Grade Should Be Used in Compressors?
For compressors, often called the heart of industrial systems, to run efficiently, quietly and for a long time, the lubrication system must work flawlessly. Compressor oil does not just reduce friction between moving parts; it also removes the high heat generated during compression, provides sealing and prevents corrosion.

Because every machine has a different operating principle and environment, putting the same type of oil in every compressor is asking for mechanical problems. Among the questions business owners and technical teams who want to make the right choice ask most often are what grade compressor oil should be and which chemical type of product should be chosen.

What Is Compressor Oil?

Compressor oil is a special industrial lubricant, resistant to high temperature and pressure, that keeps metal surfaces inside the machine from touching each other during compressed air production. Unlike standard motor oils, these oils are made of components that are highly resistant to oxidation, because they are in constant contact with air.

Although their main job is to minimize friction, modern compressor oils also prevent foaming thanks to their additives, let water separate easily from the oil (demulsification) and prevent deposits forming in the system. Available in three main groups — mineral, semi-synthetic and fully synthetic — these fluids are chosen according to the machine's operating regime.

The Importance of Compressor Oil

Managing the mechanical stress a compressor is exposed to over its working life depends entirely on the oil's performance. In a unit whose lubrication system does not work properly, friction between moving parts increases quickly, leading to overheating and eventually to parts welding together. One of the oil's most important roles is sealing. Especially in screw units, the oil film that fills the gaps between the rotors prevents air from leaking back and maintains pressure efficiency.

In addition, the oil absorbs the heat in the compression chamber and carries it to the cooler, maintaining the system's thermal balance. Choosing the wrong product or using poor-quality oil causes sludge in the system, clogging filters and separators. It is therefore very important for technical staff to study the machine's technical documents, find a clear answer to the question "What grade should compressor oil be?" and not deviate from that standard, in order to prevent unplanned stoppages and costly overhauls.

What Does the Compressor Oil Grade Mean?

The numbers you see on compressor oils represent the oil's resistance to flow, that is, its viscosity. Industrial lubrication standards usually use the ISO VG (Viscosity Grade) system. This numbering gives the oil's kinematic viscosity at 40°C in mm²/s (centistokes). For example, an oil in the ISO VG 46 class has a viscosity of about 46 units at that temperature.

The higher the number, the thicker the oil; the lower the number, the thinner and more fluid it becomes.
In system design, motor power, speed and part tolerances are calculated according to this grade. If an oil thinner than required is chosen, an adequate film does not form between metal surfaces and wear accelerates. Conversely, using an oil thicker than necessary can strain the motor, increase energy consumption and leave some points unlubricated because the oil cannot pass through narrow passages. Businesses should therefore clarify the answer to "What grade should compressor oil be?" by checking the manufacturer's recommendation.

Factors to Consider When Choosing Compressor Oil

Choosing the right compressor oil is a much broader process than just picking a grade. At the selection stage, the type of compressor (screw or piston) should be considered first, because screw compressors generally use thin oils of ISO VG 32, 46 or 68, while high-pressure piston models need thicker oils such as ISO VG 100 or 150.

The ambient temperature of the operating environment is also decisive. In very cold regions, low-grade oils that stay fluid at the first start are preferred, while in tropical or high-heat environments such as foundries, higher-grade, synthetic-based oils that do not lose viscosity should be used. The oil's flash point, oxidation resistance and water separation ability are also technical details to watch. Choosing the wrong oil can shorten separator life, causing oil to be carried into the air line and leading to costly system failures.

What Grade Should Compressor Oil Be?

The grade of oil to be used in a compressor depends directly on the unit's operating mechanism and design. Looking at general industrial standards, ISO VG 46 oils are most commonly used in screw compressors. However, ISO VG 32 is also very common in new-generation screw models with higher speeds or tighter tolerances. Because piston compressors work under heavier conditions and high pressure, they are generally designed to run on thicker, more resistant oils such as ISO VG 100 or ISO VG 150.

Characteristics of Different Compressor Oil Grades

Different viscosity grades differ in the level of protection they give the compressor's internal components and in their flow characteristics. Low-grade oils such as ISO VG 32 and 46 pass quickly through narrow passages thanks to their thin consistency and, especially in screw compressors, do an excellent job of cooling by filling the space between the rotors. The film these oils form is thin, which minimizes friction and therefore energy consumption.

On the other hand, oils of ISO VG 100 and above create a strong, thick buffer between the cylinder wall and piston rings in piston systems exposed to high pressure. Thick oils are more resistant to thinning at high temperatures and stop wear by preventing metal-to-metal contact under heavy loads. If operating in winter or in extremely cold environments, attention should be paid to the pour point of thick oil, and if necessary synthetic alternatives with high fluidity should be used.

Compressor Oil Change Interval and Maintenance

The life of compressor oil varies with the type of oil used and the unit's running hours. Mineral oils are usually changed every 2,000 to 3,000 hours of operation, while premium fully synthetic oils can maintain their performance for up to 8,000 hours. In terms of the calendar, however, it is recommended to change the oil at least once a year even if the compressor is not used often, because the oil oxidizes.

Oil maintenance should not be limited to renewing the fluid; the oil filter and separator filters must also be replaced at every change. Oil that has darkened excessively, contains metal particles or has turned milky through emulsion shows that action is needed without waiting for the interval to run out.

Long-Lasting Performance with Yıldırım Soğutma

Choosing the right oil and regular maintenance are vital for protecting your compressors' efficiency and preventing costly breakdowns. You can rely on our expertise to get the right answer to "What grade should compressor oil be?" and benefit from professional service support. As an authorized Atlas Copco distributor, we offer genuine spare parts and professional oil change services for compressors of every brand and model. Contact us and get support from our expert team for uninterrupted production and energy efficiency.

Choosing the right oil is one of the most critical factors determining compressor performance, but the technology and design of the machine used matter just as much. To learn more about high efficiency, long maintenance intervals and solutions that meet industrial standards, you can visit our Atlas Copco Compressed Air Compressors page.

For those who want to better understand maintenance, lubrication and mechanical operating principles, our article What Is a Piston Air Compressor? looks in detail at the structure and operating dynamics of piston systems.

Frequently Asked Questions (FAQ)

What does the compressor oil grade mean?

The oil grade represents the oil's resistance to flow, or viscosity, according to ISO VG (Viscosity Grade) standards. The higher the number, the thicker the oil; for example, grade 100 oil is denser than grade 46. This value is determined by the oil's flow rate at 40°C.

What grade should compressor oil be?

It depends on the type of compressor. Screw compressors generally use thin oils of ISO VG 32 or 46, while piston compressors use thick oils of ISO VG 100 or 150 for resistance to high pressure. The unit's technical catalog must always be checked for definitive information.

What should be watched when changing compressor oil?

During the change, make sure the old oil is completely drained, and always replace the oil filter and separator. Oils of different brands or grades should not be mixed. The oil level should also not exceed the marked area on the sight glass, and the seals should be checked for tightness.

How does the oil grade affect compressor performance?

Choosing the right grade minimizes friction and saves energy. Oil that is too thick tires the motor and causes heating; oil that is too thin cannot form an adequate protective layer between parts. The wrong choice reduces system efficiency by causing pressure loss and premature wear of parts.

How often should the oil be changed?

The change interval depends on the type of oil used. Mineral oils are generally changed every 2,000–3,000 hours, while synthetic oils can last up to 8,000 hours. However, even if the unit runs little, it is recommended to change the oil at least once a year because it oxidizes and loses its properties.