Atlas Copco Authorized Sales and Service Distributor
Industry Solutions 6 October 2026

Is Your Factory Losing Energy? A Chiller and Compressor Guide

Is Your Factory Losing Energy? A Chiller and Compressor Guide
Energy consumption makes up most of the operating costs in industrial facilities, and compressed air systems and cooling units in particular account for a significant share of total consumption. However, in many businesses a large part of the energy paid for is wasted because of faults in the system, without contributing to production. Energy loss in the factory is an important problem that often goes unnoticed but directly affects profitability. In this article, we look at how energy losses occur, how to detect them and how to improve efficiency in chiller and compressor systems.

What Is Energy Loss and How Does It Occur?

In industrial facilities, energy loss is when the gap between the energy put into a system and the useful work obtained exceeds design limits. This is not limited to physical leaks; inefficiencies in heat transfer, pressure losses and mechanical friction also cause energy loss. Aging equipment, poor-quality spare parts and inadequate maintenance increase these losses. What's more, because this increase is usually gradual rather than sudden, businesses often fail to notice it and accept it as normal.

Energy loss not only raises electricity bills but also makes systems work harder, shortening equipment life and increasing the risk of breakdowns. For example, small air leaks can make the compressor start more often and overheat; similarly, missing insulation and faulty sensors cause systems to consume more energy than necessary. Regular analysis and professional audits are essential to prevent such invisible losses; this both keeps costs under control and strengthens the facility's sustainability.

The Most Common Leak Points in Compressor Systems

Compressed air systems are considered one of the most expensive energy sources in industry, because converting electricity into compressed air is a thermodynamically inefficient process. So even a single gram of the air produced going to waste means a costly compressor energy loss. Air leaks in facilities usually occur at connection points, in seals and in aging hoses. The total of compressed air leaks in a factory can reach up to 20% to 30% of the air produced. This means almost a third of the compressor's running time is completely wasted.

As well as leaks, faulty piping and narrow connections in the system cause serious pressure losses. As pressure loss increases, the compressor has to raise its discharge pressure further for the machine at the end point to work. Every 1 bar increase in pressure raises the compressor's energy consumption by about 7%. Although technically not a leak, this is a chronic type of compressor energy loss caused by system design. Excessive use of elbows in pipelines and rusted inner surfaces create resistance to air flow and trigger energy waste.

Internal leaks in pneumatic tools and valves are also frequently overlooked. A faint hissing sound in the background even when the machine is not running is a warning of a big cost. To solve the compressor energy loss problem, the whole line needs to be leak-tested regularly. Clogged filters and inefficient moisture traps also increase the system's total load and reduce efficiency.

Efficiency Loss in Chiller Systems

Industrial cooling units are among the equipment most affected by outdoor conditions and water quality. The most important factor that lowers chiller efficiency values in these systems is fouling of the condenser surfaces. A condenser covered in dust, pollen and industrial waste cannot reject heat to the outside and raises system pressure. Rising pressure makes the compressor draw more current and reduces cooling capacity. A surface that is not cleaned regularly drives up operating costs by increasing energy consumption by more than 20%.

Wrong setpoints and control parameters are also common mistakes that make the system run inefficiently. A leaving water temperature set just 1 degree lower than necessary increases energy consumption by about 3%. In many facilities, very low temperatures are set "just to be safe" without analyzing the process's actual needs. This makes it impossible to optimize chiller efficiency and opens the door to energy waste. These losses can be prevented by using smart control systems and variable frequency drives (VSD).

Fouling and scaling on the water side are another critical factor that undermines evaporator efficiency. Even a thin layer of scale on the heat exchanger surface makes heat transfer harder and causes the system to run longer. To avoid losing chiller efficiency, water treatment systems must work flawlessly and water analyses must be carried out regularly. Pumps and fans in the system running constantly at full capacity rather than according to need is another factor that increases total energy waste.

How Do You Detect Energy Loss?

Detecting energy loss in industrial facilities is possible with systematic measurement and the right equipment. The first step is to carry out energy mapping that covers all subsystems, starting from the main energy inputs. Ultrasonic leak detectors are one of the most effective methods for finding leaks in compressed air systems; these devices pick up sounds at frequencies the human ear cannot hear and pinpoint the location of a leak even in noisy environments. Tagging the points found, calculating their cost and fixing them quickly forms the basis of the savings process.

In cooling systems, thermal cameras and energy analyzers play a critical role. With these devices, insulation weaknesses, temperature imbalances and performance losses are easily revealed. System performance values are also measured with flow meters and sensors and compared with design data, so efficiency losses can be clearly analyzed. This provides concrete data for managing energy loss in the factory and makes it possible to take the right action.

How Can 10–30% Energy Savings Be Achieved?

Achieving savings of up to 30% through energy efficiency work in industrial facilities is not a pipe dream. As a first step, simply repairing all the air leaks found can on its own prevent around 10% of compressor energy loss. Next comes replacing fixed-speed compressors with variable speed (VSD) models or integrating them into the system. VSD technology adjusts motor speed to air demand, eliminating idle running time.

On the cooling side, installing free cooling and heat recovery systems is a game-changer. Providing cooling without running the compressor when outdoor temperatures are low takes chiller efficiency to its peak. Using the waste heat from the compressor to produce hot water also reduces the factory's natural gas or electricity consumption in other areas. A properly designed heat recovery unit can pay for itself within a few months.

Energy Efficiency Checklist

To minimize energy losses in your factory and optimize your systems, you should regularly check the following:

  • Air Leak Audit: The entire compressed air line should be scanned with ultrasonic devices every three months and leaks repaired.
  • Condenser and Evaporator Cleaning: The heat transfer surfaces of chiller units should be cleaned periodically and water treatment values monitored.
  • Optimizing Pressure Settings: Compressor and chiller outlet pressures and temperatures should be set according to the process's minimum requirement.
  • Filter and Oil Maintenance: Resistance from clogged filters is a main cause; replacement intervals should not be missed.
  • VSD and Automation Check: Confirm that variable speed drives are working correctly and are compatible with the central automation system.
  • Insulation Check: All valves and pipes on cold and hot lines should be covered with suitable insulation materials.

Reduce Your Energy Losses and Increase Your Profitability with Yıldırım Soğutma

Don't let energy loss in the factory drag down your efficiency; our expert engineering team is by your side. You can take advantage of Yıldırım Soğutma's 24/7 service and consultancy to carry out comprehensive energy audits in your facility, achieve the best chiller efficiency solutions and solve compressor energy loss problems at the root. Let's build your factory's future together with our energy-saving projects; contact us today for detailed information.